The Ten Tec 1320 is a 14 MHz (20m) CW transceiver. It covers about 60 kHz of the band you choose from 14.000 to 14.150 MHz

The RF power output is 3-4 Watts so it's a QRP rig and good fun to build and operate, a really good introduction to building and operating

The kit is all good quality (PCB, components, case etc.) and the instructions are very good. They could do with updating and better presentation.

The 1320 is an understandable radio and, hence, can also be a learning experience. The complexity is kept to a minimum so you can always repair.

The receiver is very sensitive and selectivity is pretty good with a 4-pole crystal filter.a simple 600 Hz audio filter might help.

The 1320 is an understandable radio and, hence, can also be a learning experience. The complexity is kept to a minimum.

The transceiver is really fun to use and it draws very little current while on RX which makes is Excellent for protable QRP.

It is a joy to operate.Stable VFOs, RIT, CW is sharp, heavy duty rig that will last for a long time and gives you good DX.